Article · Wikipedia archive · Last revised Jun 29, 2026

Frame line

A frame line is the unused space that separates two adjacent images, or film frames, on the release print of a motion picture. They can vary in width; a 35 mm film with a 1.85:1 hard matte has a frame line approximately 8 mm (0.3 in) high, whereas both a full frame negative and the anamorphic format have very narrow frame lines, with the frames very close together. When a film is properly projected, the frame lines should not be visible to the audience and are typically cropped out in projection with a projector aperture, or a screen mask.

Last revised
Jun 29, 2026
Read time
≈ 1 min
Length
154 w
Citations
2
Source
Wikipedia ↗
Frame lines shown in red on a "full-frame" negative, and on a "hard-matted" 1.85:1 projection print (with sound track), both on 35 mm film. source ↗

A frame line12 is the unused space that separates two adjacent images, or film frames, on the release print of a motion picture. They can vary in width; a 35 mm film with a 1.85:1 hard matte has a frame line approximately 8 mm (0.3 in) high, whereas both a full frame negative and the anamorphic format have very narrow frame lines, with the frames very close together. When a film is properly projected, the frame lines should not be visible to the audience and are typically cropped out in projection with a projector aperture, or a screen mask.

See also

See also

References

References

  1. "Keep it All in Perspective - Aspect Ratio Target Resources". kodak.com. Retrieved 8 October 2025.
  2. "Definition of 'frame line'". collinsdictionary.com. Retrieved 8 October 2025.